Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
The federal government recently released its revised, final number of workplace fatalities in the U.S. for 2013. The overall count is down from the previous year, though not by much.
The final count of workplace fatalities in 2013 – the most recent year for which data were available – was 4584, a decrease of 44 (or 0.95%) from 4628 in 2012. The preliminary count for 2013 was 4405. Thirty four states and Washington, DC, revised their counts upward since that time.
The final numbers reflect updates to the 2013 Census of Fatal Occupational Injuries (CFOI) file made following the release of preliminary results in September 2014. Revisions and additions to the 2013 CFOI numbers come from both the identification of new cases and the revision of existing cases based on source documents received after the release of preliminary results.
After a trend toward a decreasing number of fatalities from 2006 to 2009, specifically 5840, 5657, 5214 and 4551, the number increased to nearly 4700 in 2010 and has shown slight decreases since then.
Workplace deaths by cause of event in 2013 were:
• transportation incidents: 41%
• violence and other injuries by persons or animals: 17%
• contact with objects and equipment: 16%
• slips, trips and falls: 16%
• exposure to harmful substances or environments: 7%, and
• fire and explosions: 3%.
Two types of events that rose in 2013 from 2012 were slips, trips and falls and fires and explosions. In fact, after the updates to the 2013 preliminary numbers, fatal work injuries as a result of slips, trips, and falls increased by 25 cases, raising the total to 724.
The overall fatality rate per 100,000 full-time equivalent (FTE) workers in 2013 was 3.3, down from a range of 3.4 to 3.6 from 2009 to 2012. However, the number of fatal work injuries involving Hispanic or Latino workers rose to 817 after updates, a 9 percent increase compared to the total in 2012 of 748. The fatal injury rate for Hispanic or Latino workers also rose to 3.9 per 100,000 FTE workers in 2013 from 3.7 in 2012. The number of non-Hispanic Blacks or African-Americans fatally injured at work in 2013 rose 6 percent from the preliminary count of 414 to the revised count of 439. The total for non-Hispanic white workers rose by 4 percent following the updates.
In the construction sector, there were 32 more fatalities in 2013 compared to 2012, a 3% increase and the largest number since 2009.
The total number of fatal injuries for contractors on the job in 2013 rose from 734 to 749 after updates. They accounted for 16 percent of all fatal work injuries that year.
Roadway deaths were higher by 108 cases (11 percent) from the preliminary count for 2013, increasing the total number of fatal work-related roadway incidents in 2013 to 1,099 cases. However, the final 2013 total showed a 5 percent decrease from the final 2012 count.