Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
NIOSH has published a new recommendation that says attaching a regular shop vacuum to a dust-collecting circular saw can provide a low-cost solution in order to reduce exposure to hazardous dust produced when construction workers cut fiber-cement siding.
According to a press release, the research that led to this finding was conducted in two phases. In one, researchers looked at three dust-collecting circular saws connected to an external vacuum in a laboratory setting. Further studies were conducted at construction sites where workers were cutting fiber-cement siding. Results of the field studies showed that a regular shop vacuum controlled the amount of silica-containing dust in the air to well below the NIOSH-recommended exposure limit for respirable crystalline silica.
Read entire article - http://www.cdc.gov/niosh/updates/upd-06-18-15.html