Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
Did you know in the United States that cloud-to-ground lightning happens 20 to 25 million times a year? Even with such frequency, for some reason, lightning is overlooked too often as an occupational hazard. It doesn’t get the attention of other deadly weather storms, such as hurricanes, floods or tornadoes, because it doesn’t result in mass destruction or mass casualties. But anybody working outdoors in open spaces, on or near tall objects or near explosives or conductive materials have a significant risk to being struck by lightning.
In a typical year, the central Ohio Valley, including Indiana, sees some of the most frequent lightning activity across the United States. Summertime is the peak season for lightning and a great time to educate your employees about lightning and what precautions should be taken to prevent worker exposure to this dangerous natural force.
Lightning 101 – When Thunder Roars, Go Indoors!
Remember, there is no safe place outside during a thunderstorm, so seek full-enclosed, substantial buildings with interior wiring and plumbing as these will act as an earth ground. But what if workers are caught outdoors? These are National Oceanic and Atmospheric Administration’s (NOAA) recommendations to decrease the risk of being struck:
Many people often wonder about the safety of their own vehicle during lightning. There have been enough reported incidences and injuries to know the myth of being completely safe in a car is just that - a myth. If you find yourself in your car during a lightning storm, it is best to pull off to the side of the road, turn on your emergency blinkers, turn off the engine and put your hands on your lap until the storm passes. Do not touch door or window handles, radio dials, CB microphones, gearshifts, steering wheels and other inside-to-outside metal objects.
On the other hand, heavy equipment, such as backhoes, bulldozers, loaders, graders, scrapers and mowers, which have an enclosed rollover system canopy (ROPS) are considered safe, so you should shut down the equipment, close the doors and sit with hands in lap until the storm has passed. Smaller equipment without ROPS, such as small riding mowers, golf carts and utility wagons, are not safe, and you should leave these vehicles for safe shelter.
Employers have a legal obligation to provide a safe workplace for their employees, which includes but is not limited to having an Emergency Action Plan that addresses lightning safety protocol for outdoor workers, posting information about lightning safety at outdoor worksites and offering safety training to their employees. Workplace Safety & Health Co. is here to help you keep your employees safer in thunderstorms and in all kinds of weather.