Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
OSHA’s annual preliminary list of top 10 most-cited safety violations – what National Safety Council President and CEO Deborah A.P. Hersman has called “a roadmap that identifies the hazards you want to avoid on the journey to safety excellence” – saw little change this year compared to last year’s.
The list was released Sept. 29 at the National Safety Council‘s 2015 Congress & Expo by Patrick Kapust, deputy director of OSHA’s Directorate of Enforcement Programs.
And here it is (the applicable OSHA standard appears in parentheses):
1. Fall Protection in Construction (1926.501) – 6,721
2. Hazard Communication (1910.1200) – 5,192
3. Scaffolding in Construction (1926.451) – 4,295
4. Respiratory Protection (1910.134) – 3,305
5. Lockout/Tagout (1910.147) – 3,002
6. Powered Industrial Trucks (1910.178) – 2,760
7. Ladders in Construction (1926.1053) – 2,489
8. Electrical – Wiring Methods (1910.305) – 2,404
9. Machine Guarding (1910.212) – 2,295
10. Electrical – General Requirements (1910.303) – 1,973
The figures are for FY 2015, which ran from Oct. 1, 2014 through Sept. 8, 2015. The figures were to be updated after the end of the fiscal year on Sept. 30, 2015.
In terms of ranking, only the categories of Electrical Wiring Methods and Ladders exchanged places in FY 2015.
The No. 2 violation continues to be a strong second, however. While the number of hazard communication violations issued by OSHA did not see a large increase from FY 2014 to FY 2015, its ranking on the list should still serve employers as an indicator of the importance of ensuring chemical hazard training is up to date with the agency’s adoption into its existing chemical standard.
Under GHS, chemical labels contain a signal word, pictogram and hazard statement for each hazard class and category.
There are nine standardized pictograms that must be surrounded by a red border. Precautionary statements may also be included.
SDSs now have a 16-section format, with sections that include identification of the chemical, first-aid steps for exposure and disposal considerations.
As of June 1, 2015, all new chemical labels and safety data sheets (SDSs) are required to conform to GHS. However, it is possible that some of the old-style labels and SDSs will persist for some time. Under the new system, distributors may still ship products with the previous set of labels until Dec. 1, 2015.
At Workplace Safety, we stand ready to help businesses build safety into their work practices with training programs in areas including HAZMAT/HAZWOPER, lockout/tagout, confined space entry and rescue, first aid/CPR (to including AED and Bloodborne Pathogens), asbestos operations and maintenance, excavation safety and fall protection.