Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
The Federal Railroad Administration (FRA) is urging state departments of transportation to make sure that railroad crossing warning systems interconnected to traffic lights function properly. The agency also urged states to add event recorders to traffic lights connected to railroad crossing systems so information obtained during inspections can be used to improve safety. Across the United States, there are nearly 5,000 railroad crossings interconnected with traffic lights. A state-by-state list of crossings connected to traffic lights is available at http://www.fra.dot.gov/eLib/Details/L17343.
Read entire article - http://www.fra.dot.gov/eLib/details/L17344#p1_z10_gD_lPR