Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
Research into more than 1.5 million workers’ comp claims over a period of five years provided data for a report on workplace injuries published recently by The Travelers Companies.
According to the Travelers Injury Impact Report, the most frequent causes of workplace injuries for the period from 2010 to 2014 were material handling (32 percent); slips, trips and falls (16 percent); being struck by or colliding with an object (10 percent); incidents involving tools (7 percent) and traumas occurring over time such as when a body part is injured by overuse or strain (4 percent).
All other causes accounted for the remaining 31 percent of workplace injuries.
Read entire article -