Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
When making sure first aids kits are properly stocked, it’s also a good idea to make sure they are up to date. As part of a revision to the 2014 edition, the International Safety Equipment Association (ISEA) has received American National Standards Institute (ANSI) approval for ANSI/ISEA Z308.1-2015, American National Standard-Minimum Requirements for Workplace First Aid Kits and Supplies.
The standard was put together by members of ISEA’s First Aid Group and industry stakeholders and was approved by a consensus review panel of health and safety experts, unions, construction industry and other user groups, test labs, and government agencies. According to ISEA, the 2015 revision corrects a minor measurement conversion error with respect to the U.S. measurement for minimum application for antibiotic and antiseptic supplies that appeared in the 2014 edition.The effective date of the new standard is June 2016.
A major change from previous editions is the introduction of a multi-tiered approach to kit designations. According to ISEA, the new designations were based on a review of workplace injuries in which first aid was administered and a consideration of current practices in treating them. The revision introduces two classes of first aid kits, further divided into four types.
The classes are based on the assortment and quantity of the supplies the kits contain. Class A kits are aimed at dealing with most common workplace injuries, including minor cuts, abrasions and sprains. Class B kits are designed with a broader range and quantity of supplies to deal with injuries in more complex or high-risk environments.
First aid kits are further designated by Type (I, II, III or IV) depending on the work environment in which they are to be used. A Type I kit is meant for indoor use and for and permanent mounting to a wall or other structure. In contrast, Type IV kits are suitable for outdoor use and required to pass corrosion-, moisture- and impact-resistance tests.
Many of the first aid supplies previously identified as being recommendations in the 2009 standard are now required for both of the newly-designated kit types. In addition, scissors are to be included in both classes of kits and a splint and a tourniquet are both required for a Class B first aid kit.
For more information, visit www.safetyequipment.org