Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
The National Transportation Safety Board (NTSB) has issued a brief detailing what investigators found after a fire and explosions damaged two barges that were docked in Mobile, Ala., on April 24, 2013, in order for the barges' tanks to be cleaned. Flammable vapors flowed from the tank hatches into the engine room of the towing vessel and ignited, the brief says, and the fire spread to the barges alongside. Three people were seriously burned, and damage total to the towing vessel and the barges was estimated at $5.7 million, according to the report.
Read entire article: https://www.ntsb.gov/doclib/reports/2014/MAB1413.pdf