Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
For almost 100 years, Fire Prevention Week is observed during the week of October 9 to commemorate the Great Chicago Fire of 1871. This year’s observation will be held October 3-9, 2021, and the theme will be “Learn the Sound of Fire Safety,” and the hope is to better educate the public about the sounds of smoke alarms, what those sounds mean, and how to respond.
Some basic safety tips when it comes to smoke/fire/CO alarms:
• Continuous set of three loud beeps means smoke or fire, so get out, call 911 and stay out – four beeps for carbon monoxide alarms
• A single chirp, every 30 or 60 seconds, means the battery is low and should be changed
• Chirping that continues after the battery has been replaced means the unit should be replaced as it is not functioning properly and at the end of its life (do not disconnect and forget about it)
• All smoke alarms should be replaced every 10 years
• Test all smoke and CO alarms monthly by pressing the test button
• Make sure your smoke and CO alarms meet the needs of all, including those with sensory and/or physical disabilities (ie – install bed shaker and strobe light alarms)
When thinking about workplace safety, here are some helpful tips to avoid fire in your facility or building:
• Keep your workplace as clean as possible – emptying trash regularly and don’t block any fire exits or equipment.
• Maintain electrical equipment to prevent any machines and equipment from overheating and keeping friction sparks to a minimum. Turn off lights and computers after work hours.
• Check faulty electrical wiring on a monthly basis, as faulty wiring is the most common source of workplace fires.
• Store hazardous chemicals properly – make sure each container is labelled correctly and placed in a safe storage.
• Assign designated smoking areas in your workplace and have policies in place and visible, so they can follow to avoid any fire safety issues
• Always have fire extinguishers all over the workplace – and do routine inspections to make sure they are fully charged.
• Conduct fire drills once a year with your employees
• Schedule training sessions with your employees on the proper way to use a fire extinguisher and other fire prevention equipment, as well as promote fire safety and education on fire exit routes and safety planning
• Post emergency hotline numbers in visible places – special bulletin boards, break room refrigerators, etc.
• Follow the Fire Prevention Plan (FPP) - provided by Occupational Safety and Health Administration (OSHA)